The straw honeycomb coal machine should do the following preparations before installation
The straw honeycomb coal machine has a huge user population in rural China, and some customers have not paid attention to the safety of operation during use, which has caused a series of accidents. For the safety of the customers, please use it in strict accordance with operating standards. Preparatory work and security checks must be performed before installation to properly test the machine. Many customers often ignore the importance of these tasks, but they do not know that this will seriously affect the service life of the equipment. To this end, we have formulated the following standards and hope that our customers will strictly adhere to:
Before installing the straw honeycomb coal machine, please follow the steps below: 1. First level the machine and firmly fix it on the cement foundation. 2. Clean the oil and dirt on the machine, and fill the transmission and moving parts with lubricating oil. 3. Check whether the screws in all parts are loose. 4. Adjust the position and clearance of each part such as turning, stamping, etc. After adjusting, move the pulley by hand, and each operating part should run freely. 5. The belt pulley of the host machine rotates clockwise and forward. Reverse is strictly prohibited. Remove the V-belt test motor before turning on the machine. The V-belt test machine can only be installed when the motor turns in the same direction as that of the large wheels of the rotating machine. 6. When testing the machine, first use the jog method to make the motor rotate in pulses. If there is no other noise, the car can be driven only when it is running normally. It is strictly forbidden to start with a heavy vehicle. Only after the standby device runs normally can it be put into production.
For inquiries on various technical knowledge such as ball press, please visit our website: http://bjkrui.com
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.