In addition to the failure of the ball press itself, most of the failures encountered during installation and debugging are caused by external equipment. Here are two reasons for the failure of external equipment.
Video scrolling: Dome video images are continuously scrolling on the monitor. This phenomenon is mostly caused by video synchronization problems. Most of the 24VAC domes are automatically synchronized according to the phase in the AC power supply. The dome menu can be adjusted to select the phase automatic synchronization function. If the automatic synchronization fails due to the power phase, you can manually set the phase value in the dome menu to solve the synchronization problem.
Repeated restart of dome camera: Repeated restart of dome camera is usually caused by the power of the power supply is too low to drive the dome camera to work normally. First use a multimeter to test the power supply voltage of the dome camera. It must be measured with the load turned on to determine whether there is a power supply problem. It is important to note that the power consumed by the outdoor dome when the heater is on and not on is very different. The maximum power of the dome must be considered when supplying power to ensure that the power supply equipment is sufficient to drive the dome to work properly.
When the dome rotates irregularly, first check whether the center equipment has malfunctioned, and then check whether the dome menu has activated the random scan mode. If the above steps are normal, most of them are caused by uninterrupted transmission of garbled information due to interference of the data communication line. The interference mainly comes from electromagnetic interference on the transmission path, and the optical transceiver may also have deviations during the photoelectric reduction.
Although brand resources are effectively used, actual experience is still the key to engineering.
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.