Want ball press equipment to find Xinzhong Machinery

Item display

Briefly introduce you to the application of ball press and some related knowledge

We have already introduced a lot about the ball press machine, here is to add again, the characteristics of the ball press machine and the ground loop circuit.
The ball press is mainly used for pressing powdery materials that are difficult to form. It is characterized by high forming pressure, adjustable main machine revolutions, and is equipped with a screw feeding device.
The host is powered by an electromagnetic speed-regulating motor, which is transmitted to the drive shaft via a pin-pin coupling via a pulley, a cylindrical gear reducer. The active and passive shafts are synchronized by open gears. There is a hydraulic device behind the passive bearing seat.
The screw feeding device is driven by an electromagnetic speed-regulating motor, and is rotated by a pulley and a worm reducer to force the pressed material into the main feeding port. Due to the constant torque characteristics of the electromagnetic speed-regulating motor, when the amount of material held by the screw feeder is equal to the amount of material required by the host, a constant supply pressure can be maintained to stabilize the pellet quality. If the supply is too large, the electricity of the feeding device is overloaded; if the supply is too small, the ball will not become a ball. Therefore, skilled operation skills are an important condition to ensure the normal operation of the ball.
In the hydraulic protection device, a high-pressure oil is driven into a hydraulic cylinder by a hydraulic pump, and the piston is axially displaced. The front joint of the piston rod is pressed against the bearing seat to meet the production pressure requirements. When the feed between the two pressure rollers is too much or it enters the metal block, the hydraulic cylinder piston rod is overloaded by pressure, the hydraulic pump will stop, the accumulator will buffer the pressure change, the overflow valve will open and return, and the piston rod will shift Enlarging the gap between the pressure rollers allows hard objects to pass through the pressure rollers, and the system pressure returns to normal, which can protect the pressure rollers from damage. The machine can adjust the pressure according to the requirements of the ball density, and the production is flexible.
The grounding of the ball press can be divided into internal electrical grounding and ground coverage. Shell ground is mainly used to prevent the accumulation of static electricity and leakage. Outdoor ball presses must also be equipped with external lightning protection measures. Generally speaking, the ground ball protection installed on the outdoor ball connected to the rotating machine due to the metal bracket has been formed naturally, and the protection against the ground fault cannot be done specially by the pole bracket housing. The data and video cables inside the ball press are handled on the ground in this yard and connected to GND to ensure that the equipment is effectively grounded to the ground ball machine. Ground loop closed loop Even if the equipment is effectively grounded, but the different zero components between the ball press and the center, the positions of the potential differences, no power load balance, will rise to the ground potential difference. Through the potential difference of the coaxial cable, a closed loop current is generated and generates interference, which affects the normal video signal transmission, which usually gives an intermediate level of image confusion. The most effective way to solve the loop, loop is to increase the video transmission to the central isolation.
For more information about ball presses, please continue to pay attention to: http://bjkrui.com .

How to identify the strength of the finished ball of the dry powder compactor?
Application of composite adhesive in the process of ore powder pressing ball mechanism
Reducing the energy consumption of ball presses requires technological innovation by enterprises
2017 oriental briquette machine is more worth looking forward to
The construction of the ecological environment is to promote the industry
Significance of Pulverized Coal Forming Technology for Producing Briquettes

Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.

Recommended products: Ball compaction type coal compactor, dry powder compactor, mineral powder compactor, horizontal double shaft mixer, hammer crusher, impact crusher, fluorite powder compactor

Phone: 0371-55951060 Mobile: 18625555675 (WeChat) / 13938414363
Xinzhong Machinery http://bjkrui.com Address: 18 Dongfang Road, Mazhai Economic Development Zone, Erqi District, Zhengzhou City
Briquette briquette machine , dry powder briquette machine , ore powder briquette machine , desulfurized gypsum briquette machine , pulverized coal briquette machine ,

七乐彩 韦德足球 天天电玩城 欢乐拼三张