Want ball press equipment to find Xinzhong Machinery

Item display

Talking about the failure caused by external equipment when the ball press is installed and debugged

Regarding the ball press, in addition to the fault of the ball press itself, most of the failures encountered during installation and debugging were caused by external equipment. Here is a brief introduction for everyone.
Dome video images are constantly scrolling on the monitor. This phenomenon is mostly caused by video synchronization problems. Most of the 24VAC domes are automatically synchronized according to the phase in the AC power supply. The dome menu can be adjusted to select the phase automatic synchronization function. If the automatic synchronization fails due to the power phase, you can manually set the phase value in the dome menu to solve the synchronization problem.
Repeated restart of the dome is usually caused by the power of the power supply is too low to drive the dome to work normally. First use a multimeter to test the power supply voltage of the dome camera. It must be measured with the load turned on to determine whether there is a power supply problem. It is important to note that the power consumed by the outdoor dome when the heater is on and not on is very different. The maximum power of the dome must be considered when supplying power to ensure that the power supply equipment is sufficient to drive the dome to work properly.
When the dome rotates irregularly, first check whether the center equipment has malfunctioned, and then check whether the dome menu has activated the random scan mode. If the above steps are normal, most of them are caused by uninterrupted transmission of garbled information due to interference of the data communication line. The interference mainly comes from electromagnetic interference on the transmission path, and the optical transceiver may also have deviations during the photoelectric reduction.
For more information about ball press, please pay attention to this site.

How to identify the strength of the finished ball of the dry powder compactor?
Application of composite adhesive in the process of ore powder pressing ball mechanism
Reducing the energy consumption of ball presses requires technological innovation by enterprises
2017 oriental briquette machine is more worth looking forward to
The construction of the ecological environment is to promote the industry
Significance of Pulverized Coal Forming Technology for Producing Briquettes

Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.

Recommended products: Ball compaction type coal compactor, dry powder compactor, mineral powder compactor, horizontal double shaft mixer, hammer crusher, impact crusher, fluorite powder compactor

Phone: 0371-55951060 Mobile: 18625555675 (WeChat) / 13938414363
Xinzhong Machinery http://bjkrui.com Address: 18 Dongfang Road, Mazhai Economic Development Zone, Erqi District, Zhengzhou City
Briquette briquette machine , dry powder briquette machine , ore powder briquette machine , desulfurized gypsum briquette machine , pulverized coal briquette machine ,

七乐彩 韦德足球 天天电玩城 欢乐拼三张