The equipment is necessary for daily maintenance and inspection during use. Pay attention to check whether the installation screw is loose, the motor current, the amount of oil, the heating of the bearing, and the pressure of the cylinder when the V-belt is running. The oil pressure of the oil cylinder should be stopped for inspection. Pressure changes caused by changes in air temperature, oil leakage, etc., should be filled with new oil or run back to correct the oil pressure period to reach the specified working pressure change. If any oil leakage in the oil pressure system is found during operation, it should be stopped immediately and repaired. Restart after oil leakage.
No matter how careful the operation is, the wearing parts and bearings other than the pressure roller will always be worn. Generally speaking, because many parts of the molding machine are surrounded by dust, during the mid-term shutdown inspection, no parts or It is necessary to dismantle certain parts for inspection, to better understand the operation of each part of the ball press.
Method for regular check of briquette machine:
1. Remove the bearing cover of the roller shaft and check the wear of the bearing;
2. Sweep the dust that was shot down on the ball press, and pay attention to dust removal during dismantling. It is strictly forbidden for dust to enter the moving part during dismantling inspection;
3. Remove the inspection cover of the reducer to check the gear wear and meshing status;
4. Open the internal cleaning inspection, check the wear of bearings, spirals, triangle liners, nozzles and other components, and replace bearing grease;
V. Check whether the foundation bolts and safety bolts are loosened and tightened.
Use and inspection of equipment lubricants:
1. The gear oil in the open gear box must penetrate the gear more than 60 mm
2. The roller bearing is opened every three months to replace the grease or grease gun.
3. Reducer and gear oil can minimize the shutdown caused by stoppage, and can effectively ensure the continuous operation of the equipment.
The above information comes from: bjkrui.com .
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.