When disassembling the dry powder ball press , the user should carefully protect its eccentric shaft and place it in bending deformation:
1. Overturning occurred during the hoisting process of the main machine, which caused excessive bending on one side of the eccentric shaft. Therefore, when transporting the ball press equipment, the host should be hoisted correctly to ensure the integrity and reliability of the equipment and avoid unnecessary damage to the equipment during transportation;
2. It will also cause bending due to excessive force work, such as the hardness of the broken object exceeds the product instruction manual. If this happens, it should be shut down and checked in time to select the appropriate working intensity according to the compressive strength of the material to avoid overloading of the ore powder ball press, pulverized coal ball press and other equipment;
3. The main unit of the dry powder ball press has been running under negative load for a long time, which is caused by the aging of the equipment. Long-term overload operation not only greatly affects the service life of the ball press equipment, but also increases the degree of wear and tear of the parts. Therefore, the work load of the ball press machine should be adjusted, and the equipment should be replaced in time when it is aging;
4. The elbow or pad is not up to standard, and the eccentric shaft will protect itself when the non-crushing material enters the crushing cavity. The self-breaking of the eccentric shaft is mainly caused by the substandard sub-plates, which should be replaced with new eccentric shafts and sub-plates that meet the requirements of the operation in time;
5. Improper heat treatment of eccentric shaft, stress is too concentrated, resulting in short-term fracture. The specific forging process of parts will affect the use effect and working time of the parts. Therefore, the heat treatment process of the eccentric shaft should be selected appropriately and effectively to avoid the work obstacle of the ball press equipment caused by unqualified parts processing.
Zhengzhou Dongfang Heavy Machinery Co., Ltd. specializes in the production of ball presses, briquette ball presses , dry powder ball presses, desulfurized gypsum ball presses , mineral powder ball presses, and coal powder ball presses. We warmly welcome customers to come to our company for consulting business or visits! Inquiries: 0371-88885089 0371-67169912 Ball press equipment network: http://bjkrui.com (lh)
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.