Troubleshooting of briquette briquette machine installation and commissioning:
1. Dome camera restarts repeatedly: Dome camera restarts usually because the power supply power is too low to drive the dome camera normally. First use a multimeter to test the power supply of the dome camera. It must be measured with the load (ball machine) turned on to determine whether there is a power supply problem. It is important to note that the power consumed by the outdoor dome when the heater is on and not on is very different. The maximum power of the dome must be considered when supplying power to ensure that the power supply equipment is sufficient to drive the dome to work.
2. Video scrolling: Dome video images are continuously scrolling on the monitor. This phenomenon is mostly caused by video synchronization problems. Most of the 24VAC domes are automatically synchronized according to the phase in the AC power supply. The dome menu can be adjusted to select the phase automatic synchronization function. If the automatic synchronization fails due to the power phase, you can manually set the phase value in the dome menu to solve the synchronization problem.
3. Control garbled: When the dome rotates irregularly, first check whether the center device has misoperation, and then check whether the dome menu has started random scan mode. If the above steps are normal, most of them are caused by uninterrupted transmission of garbled information due to interference of the data communication line. The interference mainly comes from electromagnetic interference on the transmission path, and the optical transceiver may also have deviations during the photoelectric reduction.
Zhengzhou Dongfang Heavy Machinery Co., Ltd. specializes in the production of ball presses, briquette ball presses, dry powder ball presses , desulfurized gypsum ball presses, mineral powder ball presses , and coal powder ball presses. Facing the rapid development of science and technology, Orientals will, as always, adhere to the tenet of "quality first, credit first", carry out production management in full accordance with the ISO9001 quality management system, and sincerely return the trust and trust of our customers with advanced technology and excellent service stand by. Inquiries: 0371-88885089 0371-67169912 Ball press equipment network: http://bjkrui.com (lh)
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.