Three main components of desulfurized gypsum ball press :
Electrical connection: This work must be done by a full-time electrician:
1. First check the electrical components of the switchboard. See if the pile head is loose. See if the cable is connected between the components. Connect the main power and the grounding device at the same time.
2. After turning on the electrical power of each device, the machines do not hang the V-belt empty motor for trial rotation. After ensuring that the motor rotation is consistent with that of the equipment, set the V-belt for empty machine trial rotation.
3. After the stand-alone idling is all normal, enter the whole line of idling test.
4. When the load is rotating forward, check the load of each meter on the switchboard.
1. Adjust the center bracket so that the middle bracket and the conveyor frame are fastened with the fixing bolts.
2. Butt the conveying tape so that the anastomosis line of the tape interface and the edge of the tape are connected.
3. Adjust the tightness of the conveying tape, and the lower side of the conveying tape is required to be close to the upper edge of the moving roller of the middle support.
4. Make an empty test run to see if there is a deviation.
1. Adjust the tightness of the triangle belt, the tightness requirements
2. Adjust the gap between the two rollers by pressing down or raising the inclined iron.
3. Trial run of empty machine, start feeding test load after no abnormality.
4. Observe the state of the extruded material, it should be sheet-like, block-shaped, feel a certain strength with the pinch, you can not force into powder.
Zhengzhou Dongfang Heavy Machinery Co., Ltd. specializes in the production of ball presses, briquette ball presses, dry powder ball presses, desulfurized gypsum ball presses, mineral powder ball presses , and coal powder ball presses . We have always maintained the business philosophy of survival by quality and development by integrity, and everything is based on the interests of customers. Inquiries: 0371-88885089 0371-67169912 Ball press equipment network: http://bjkrui.com (lh)
Xinzhong Machinery is a joint-stock enterprise focusing on production machinery, integrating scientific research, production and sales. The company area is located in Zhengzhou Mazhai Economic Development Zone, covering an area of 60,000 square meters, with more than 35,000 square meters of standard workshops, more than 180 main processing equipment, and more than 1,000 online employees. Mainly produces ore powder ball press , hydraulic ball press , briquette ball press , dry powder ball press , desulfurized gypsum ball press , fire-free brick machine , road tile machine , sand making machine , ball mill , Raymond mill , Impact crusher and other products. Welcome new and old customers to visit and guide.